cdbcols.h File Reference

Detailed Description

Deprecatedsince v9.1. Functionality is replaced with commsdat.

NETWORK

IAP

Internet access point table identifier.

DIAL_OUT_ISP

Identifier of default dial-out ISP table.

Field type: TUint32

DIAL_IN_ISP

Dial-in Internet Service Provider.

OUTGOING_WCDMA

Outgoing WCDMA table.

INCOMING_WCDMA

Not used in v7.0

LAN_SERVICE

PAN_SERVICE_EXTENSIONS

WLAN_SERVICE_EXTENSIONS

MODEM_BEARER

Identifier of modem settings table. In v7.0s, this table changed its name from MODEM to MODEM_BEARER. In v6.1, it is possible to define only a single record for this table.

LAN_BEARER

LOCATION

Identifier of the default location table. In 6.1, it is possible to define only a single record for this table. Field type: TUint32

CHARGECARD

Identifier of the default chargecard table.

Field type: TUint32

PROXIES

Identifier of proxy server settings table.

WAP_ACCESS_POINT

Identifier of default WAP Access Point table.

Field type: TUint32

WAP_IP_BEARER

WAP IP bearer.

WAP_SMS_BEARER

WAP SMS bearer.

DEFAULT_GPRS

GPRS default settings.

It is possible to define only one record for this table.

BT_DEVICE_TABLE

Bluetooth device table.

BT_DEFAULT_TABLE

Bluetooth default table.

BT_SECURITY_TABLE

Bluetooth security table.

BT_PERSIST_TABLE

Bluetooth persist table.

SS_PROTO_TABLE

Identifier of the sockets table.

AGENT_LOOKUP

Agent lookup table identifier

VIRTUAL_BEARER

VPN_SERVICE

WLAN_SERVICE_EXTENSION_TABLE

ACCESS_POINT_TABLE

IAP_PRIORITY_SELECTION_POLICY_TABLE

XML_ACCESS_POINT_TABLE

AP_PRIORITY_SELECTION_POLICY_TABLE

TIER_TABLE

MCPR_TABLE

CPR_TABLE

SCPR_TABLE

PROTOCOL_TABLE

BEARER_TYPE_TABLE

CONFIG_ACCESS_POINT_TABLE

XML_AP_PRIORITY_SELECTION_POLICY_TABLE

XML_TIER_TABLE

XML_MCPR_TABLE

XML_CPR_TABLE

XML_SCPR_TABLE

XML_PROTOCOL_TABLE

XML_BEARER_TYPE_TABLE

XML_CONFIG_ACCESS_POINT_TABLE

EAP_SEC_TABLE

TUN_EAP_TABLE

EAP_TLS_TABLE

LEAP_TABLE

EAPSIM_PROTOCOL_TABLE

EAPAKA_PROTOCOL_TABLE

POLICY_SELECTOR_TABLE

XML_POLICY_SELECTOR_TABLE

POLICYSELECTOR2QOSPARAMETERS_TABLE

XML_POLICYSELECTOR2QOSPARAMETERS_TABLE

GENERIC_QOS_TABLE

XML_GENERIC_QOS_TABLE

WIFI_SCANENGINE_TABLE

MODEM

Identifier of default modem.

Field type: TUint32 DeprecatedUnsupported since v7.0

OLD_MODEM_TABLE

DeprecatedUnsupported since v7.0

REDIAL_ATTEMPTS

Number of times to attempt redial when the ISP number is busy.

Field type: TUint32

SMS_BEARER

The bearer for sending SMS.

Values for this are defined by the enum RMobileSmsMessaging::TMobileSmsBearer

Field type: TUint32

SMS_RECEIVE_MODE

The SMS receive mode, taken from RMobileSmsMessaging::TMobileSmsReceiveMode.

Field type: TUint32

GPRS_ATTACH_MODE

The GPRS attach mode, i.e. whether to attach at the boot-up of the device or at a later time.

Values for this are defined by the enum RPacketService::TAttachMode Field type: TUint32

ACCEPT_INCOMING_GPRS

Whether or not to allow incoming requests for PDP context activation to be automatically accepted (when there is a waiting application).

Use a TBool to specify the value.

Field type: TUint32

GPRS_CLASS_C_BEARER

The preferred bearer when device is forced into GPRS Class C operation.

The values for this field are defined by TCommDbGprsClassCBearer.

Field type: TUint32

See also: TCommDbGprsClassCBearer

CONNECTION_ATTEMPTS

The number of connection attempts (preferences) to make.

This is limited to a maximum of 2.

Field type: TUint32

MODEM_DATA_FAX

Specifies the ID of the modem record to be used for data transactions.

Field type: TUint32

MODEM_PHONE_SERVICES_SMS

Specifies the ID of the modem record to be used for phone services such as SMS.

Field type: TUint32

LOCATION_DATA_FAX

Specifies the location to be used with the default modem for data transactions.

Field type: TUint32

LOCATION_PHONE_SERVICES_SMS

Specifies the location to be used with default modem for phone services such as SMS.

Field type: TUint32

MAXMBUF_HEAP

Maximum RMBuf heap size.

Field type: TUint32

DEFAULT_AGENT

DEFAULT_NETWORK

BEARER_AVAILABILITY_CHECK_TSY

CDMA_OP_CAPABILITY

Operation capability bitmap to indicate which operations are supported by the MS. Bit allocation:

bit 0 - SimpleIP supported

bit 1 - MobileIP supported

bit 2 - MobileIP with simple IP fallback supported

bits 3-7 - reserved

Field type: TUint32

CDMA_SIMIP_MAX_NUM_NAI

Maximum number of SimpleIP NAI entries.

Field type: TUint32

CDMA_SIMIP_MAX_NAI_LENGTH

Maximum SimpleIP NAI length (min 72 octets).

Field type: TUint32

CDMA_SIMIP_MAX_SS_LENGTH

Maximum length of SimpleIP shared secret data.

Field type: TUint32

CDMA_SIMIP_AUTH_SUPPORTED

SimpleIP authentication algorithm bitmap supported by the MS. Bit allocation:

bit 0 - CHAP supported

bit 1 - PAP supported

bits 2-7 - reserved

Field type: TUint32

CDMA_MIP_MAX_NUM_NAI

Maximum number of mobile IP NAI entries.

Field type: TUint32

CDMA_MIP_MAX_NAI_LENGTH

Maximum MobileIP NAI length (min 72 octets).

Field type: TUint32

CDMA_MIP_MAX_MN_AAA_SS_LENGTH

Maximum length of the shared secret data (MN-AAA)

Field type: TUint32

CDMA_MIP_MN_AAA_AUTH_ALGORITHM

Authentication algorithm bitmap (MN-AAA) supported by the mobile station. Bit allocation:

bit 0 - MD5 authentication supported (RFC 3012)

bits 1-7 - reserved

Field type: TUint32

Authentication algorithm (MN-AAA). Possible values:

0000 - No authentication

0001 - MD5 authentication (IETF RFC 2002)

Field type: TUint32. This field may be left as NULL.

CDMA_MIP_MAX_MN_HA_SS_LENGTH

Maximum length of the shared secret data (MN-HA)

Field type: TUint32

CDMA_MIP_MN_HA_AUTH_ALGORITHM

Authentication algorithm bitmap (MN-HA) supported by the mobile station. Bit allocation:

bit 0 - MD5 authentication supported (RFC 3012)

bits 1-7 - reserved

Field type: TUint32

Authentication algorithm (MN-HA). Possible values:

0000 - No authentication

0001 - MD5 authentication (IETF RFC 2002)

Field type: TUint32. This field may be left as NULL.

PROMPT_FOR_AP

Prompt for an Access Point if used.

Field type: TBool

DEFAULT_AP

If default Access Point is defined, use default Access Point. Otherwise use connection preferences.

Field type: TUint32

DEFAULT_SNAP

This field differentiate the Bravo selection from the 399 selection (needed for implicit scenarios where prefs are not available).

Field type: TUint32

DEFAULT_TIER

Default tier.

Field type: TUint32

PROMPT_USER

Prompt the User.

Field type: TBool

REGULATORY_DOMAIN

This field defines the default or current IEEE 802.11 regulatory domain or country code. Field type: TCommsDatWlanRegDomain

WMM_ENABLED

ENABLE_COUNTRYCODE

This field determines whether to use the country code information or not.

Field type: TBool

DEFAULT_REGULATORY_DOMAIN

This field defines the default regulatory domain or country code.

Field type: TDesC

ASK_USER_BEFORE_DIAL

Maintained for backwards compatibility. Specifies whether to show the connection dialog. Field type: TUint32 (Boolean) Deprecatedv7.0

DIAL_OUT_IAP

Identifier of default dial-out IAP.

Field type: TUint32 Deprecatedv7.0

DIAL_IN_IAP

IAP_ISP

Identifier of (dial out) ISP in this IAP. Field type: TUint32. This field may not be left as NULL. Deprecatedv7.0

CLIENT_TIMEOUT

Time to stay online when all clients have closed.

Field type: TUint32 Deprecatedv7.0

ROUTE_TIMEOUT

Time to stay online when idle.

Field type: TUint32 Deprecatedv7.0

OUTGOING_GPRS

Outgoing GPRS table.

INCOMING_GPRS

Incoming GPRS table.

ECommDbBearerUnknown

ECommDbBearerCSD

ECommDbBearerWcdma

ECommDbBearerLAN

ECommDbBearerCdma2000

ECommDbBearerPSD

ECommDbBearerVirtual

ECommDbBearerPAN

ECommDbBearerWLAN

ECommDbBearerGPRS

Avoids the need for lots of search & replace in migrations from v6.1

COMMDB_ID

Unique ID assigned by the server for identification of records by the server.

Field type: TUint32

COMMDB_NAME

Name of the record for easy identification by the user.

This is not present in the some tables. Field type: Text.

COMMDB_UNUSED_NAME

const TLitC< sizeof(L"__UNUSED_ENTRY_DO_NOT_DELETE__")/2 >COMMDB_UNUSED_NAME[static]

IAP_DIALOG_PREF

Identifier of the dialog preference in this IAP.

Field type: TUint32. This field may be left as NULL.

IAP_SERVICE

Identifier of the service in this IAP.

Field type: TUint32. This field may not be left as NULL.

IAP_SERVICE_TYPE

Name of the service table (e.g. DIAL_OUT_ISP, OUTGOING_GPRS) in this IAP.

Field type: Text. This field may not be left as NULL.

IAP_BEARER

Identifier of the bearer in this IAP.

Field type: TUint32. This field may be left as NULL.

IAP_BEARER_TYPE

Identifier of the type of the bearer in this IAP.

Field type: Text. This field may be left as NULL.

IAP_NETWORK

Identifier of the network in this IAP.

Field type: TUint32. This field may be left as NULL.

IAP_APPSID

Identifier of the Application secure ID in this IAP.

Field type: TUint32. This field may be left as NULL.

IAP_NETWORK_WEIGHTING

Identifier of the weighting for networks in this IAP.

Field type: TUint32. This field may be left as NULL.

IAP_LOCATION

Identifier of the location in this IAP.

Field type: TUint32. This field may be left as NULL.

BCA_STACK

IF_NAME

SERVICE_IF_PARAMS

SERVICE_IF_NETWORKS

SERVICE_IF_EXTERN_IP_CONFIG_ALWAYS_REJECT_AUTH

When using external IP configuration (MobileIP or DHCP), always reject PPP peer authentication requests. If external IP configuration is used and this field is set to TRUE then peer authentication requests are always rejected. If external IP configuration is used and this field is set to FALSE then PPP allows authentication to proceed (although it may still fail later). If this field is not set or absent, the result is the same as when it is set to TRUE.

SERVICE_IF_PROMPT_FOR_AUTH

SERVICE_IF_AUTH_NAME

SERVICE_IF_AUTH_PASS

SERVICE_IF_AUTH_RETRIES

SERVICE_IF_CALLBACK_ENABLED

SERVICE_IF_CALLBACK_TYPE

SERVICE_IF_CALLBACK_INFO

SERVICE_CALLBACK_TIMEOUT

SERVICE_IF_SERVER_MODE

SERVICE_IP_ADDR_FROM_SERVER

SERVICE_IP_ADDR

SERVICE_IP_NETMASK

SERVICE_IP_GATEWAY

SERVICE_IP_DNS_ADDR_FROM_SERVER

SERVICE_IP_NAME_SERVER1

SERVICE_IP_NAME_SERVER2

SERVICE_IP6_DNS_ADDR_FROM_SERVER

SERVICE_IP6_NAME_SERVER1

SERVICE_IP6_NAME_SERVER2

SERVICE_ENABLE_IP_HEADER_COMP

SERVICE_ENABLE_LCP_EXTENSIONS

SERVICE_DISABLE_PLAIN_TEXT_AUTH

SERVICE_ENABLE_SW_COMP

SERVICE_IP_ADDR_LEASE_VALID_FROM

SERVICE_IP_ADDR_LEASE_VALID_TO

SERVICE_CONFIG_DAEMON_MANAGER_NAME

SERVICE_CONFIG_DAEMON_NAME

SERVICE_ENABLE_LLMNR

Enable link-local multicast name resolution

Field type: TBool. This field may be left as NULL.

ISP_SERVICE_ENABLE_LLMNR

GPRS_SERVICE_ENABLE_LLMNR

LAN_SERVICE_ENABLE_LLMNR

CDMA_SERVICE_ENABLE_LLMNR

VPN_SERVICE_ENABLE_LLMNR

ISP_DESCRIPTION

Description of ISP (for use by applications etc.)

Field type: Text. This field may be left as NULL.

ISP_TYPE

TCommsDbIspType value indicating ISP type, e.g. Internet, LAN, etc.

Field type: TUint32. This field may be left as NULL.

ISP_DEFAULT_TEL_NUM

Default phone number.

Field type: Text. This field may be left as NULL.

ISP_DIAL_RESOLUTION

Perform dialling resolution for default phone number?

Field type: TBool. This field may not be left as NULL.

ISP_USE_LOGIN_SCRIPT

Use login script?

Field type: TBool. This field may not be left as NULL.

ISP_LOGIN_SCRIPT

Login script (used if ISP_USE_LOGIN_SCRIPT is ETrue).

Type Text. This field may be left as NULL.

ISP_PROMPT_FOR_LOGIN

Prompt user for username and password?

Field type: TBool. This field may not be left as NULL.

ISP_LOGIN_NAME

Login name

Field type: Text. This field may be left as NULL.

ISP_LOGIN_PASS

Login Password

Field type: Text. This field may be left as NULL.

ISP_CHARGECARD

Identifier of the chargecard used for this ISP (optional).

Field type: TUint32. This field may be left as NULL.

ISP_DISPLAY_PCT

Display post connection terminal (PCT) (without scanning script for READ command)?

Field type: TBool. This field may be left as NULL.

ISP_IF_PARAMS

Interface parameter string

Field type: Text. This field may be left as NULL.

ISP_IF_NETWORKS

Comma separated list of network protocols, e.g. "IP"

Field type: Text. This field may be left as NULL.

ISP_IF_PROMPT_FOR_AUTH

Prompt user for authentication username and password?

Field type: TBool. This field may not be left as NULL.

ISP_IF_AUTH_NAME

Authentication username used by PPP

Field type: Text. This field may be left as NULL.

ISP_IF_AUTH_PASS

Authentication password used by PPP

Field type: Text. This field may be left as NULL.

ISP_IF_AUTH_RETRIES

Number of retries if authentication fails.

Field type: TUint32. This field may be left as NULL.

ISP_IF_CALLBACK_ENABLED

Callback enabled?

Field type: TBool. This field may be left as NULL.

ISP_IF_CALLBACK_TYPE

TCallbackAction value indicating type of callback (if enabled)

Field type: TUint32. This field may be left as NULL.

ISP_IF_CALLBACK_INFO

Callback information, e.g. phone number to call back to.

Field type: 8-Bit Text. This field may be left as NULL.

ISP_CALLBACK_TIMEOUT

Time to wait for callback in microseconds (if enabled)

Field type: TUint32. This field may be left as NULL.

ISP_IF_SERVER_MODE

PPP in server mode?

Field type: TBool. This field may be left as NULL.

ISP_IP_ADDR_FROM_SERVER

Get IP address from server?

Field type: TBool. This field may not be left as NULL.

ISP_IP_ADDR

IP address of interface

Field type: Text. This field may be left as NULL.

ISP_IP_NETMASK

IP net mask of interface

Field type: Text. This field may be left as NULL.

ISP_IP_GATEWAY

IP address of gateway

Field type: Text. This field may be left as NULL.

ISP_IP_DNS_ADDR_FROM_SERVER

Get DNS addresses from server?

Field type: TBool. This field may not be left as NULL.

ISP_IP_NAME_SERVER1

IP address of primary name server

Field type: Text. This field may be left as NULL.

ISP_IP_NAME_SERVER2

IP address of secondary name server

Field type: Text. This field may be left as NULL.

ISP_IP6_DNS_ADDR_FROM_SERVER

ISP_IP6_NAME_SERVER1

ISP_IP6_NAME_SERVER2

ISP_IP_ADDR_LEASE_VALID_FROM

ISP_IP_ADDR_LEASE_VALID_TO

ISP_CONFIG_DAEMON_MANAGER_NAME

Name of the ECOM configuration daemon manager component. This component interfaces with the server identified in ISP_CONFIG_DAEMON_NAME. If specified, ISP_CONFIG_DAEMON_NAME should also be specified.

Field type: Text. This field may be left as NULL.

ISP_CONFIG_DAEMON_NAME

Name of the configuration daemon server. This server is used to provide further configuration for a connection, e.g. dynamic IP address assignment. If specified, ISP_CONFIG_DAEMON_MANAGER_NAME should also be specified.

Field type: Text. This field may be left as NULL.

ISP_ENABLE_IP_HEADER_COMP

Enable IP header compression

Field type: TBool. This field may be left as NULL.

ISP_ENABLE_LCP_EXTENSIONS

Whether to enable LCP extensions.

Field type: TBool. This field may be left as NULL.

ISP_DISABLE_PLAIN_TEXT_AUTH

Disable plain text authentication?

Field type: TBool. This field may be left as NULL.

ISP_ENABLE_SW_COMP

Enable software compression (e.g. Microsoft, STAC or Predictor compression)?

Field type: TBool. This field may be left as NULL.

ISP_BEARER_NAME

The name of the bearer (RMobileCall::TMobileCallDataProtocol value)

Field type: TUint32. This field may be left as NULL.

ISP_BEARER_SPEED

Connection speed if this is an ISDN, HSCSD or other connection (RMobileCall::TMobileCallDataSpeed value).

Field type: TUint32. This field may be left as NULL.

ISP_BEARER_CE

The bearer CE (RMobileCall::TMobileCallTchCoding value)

Field type: TUint32. This field may be left as NULL.

ISP_INIT_STRING

Modem initialization string to be used when this ISP is in use. This string will be copied into the MODEM_ISP_INIT_STRING field by RGenericAgent.

Field type: TUint32. This field may be left as NULL.

ISP_BEARER_TYPE

TCommsDbBearerType value indicating connection type, e.g. Standard GSM, HSCSD.

Field type: TUint32. This field may be left as NULL.

ISP_CHANNEL_CODING

RMobileCall::TMobileCallTchCoding value specifying HSCSD channel coding.

Field type: TUint32. This field may be left as NULL.

ISP_AIUR

RMobileCall::TMobileCallAiur value specifying AIUR for HSCSD.

Field type: TUint32. This field may be left as NULL.

ISP_REQUESTED_TIME_SLOTS

Requested number of time slots for HSCSD.

Field type: TUint32. This field may be left as NULL.

ISP_MAXIMUM_TIME_SLOTS

Maximum number of time slots for HSCSD which could be requested during this connection.

Field type: TUint32. This field may be left as NULL.

ISP_AUTHENTICATION

Reserved for future use.

Field type: Text. This field may be left as NULL.

ISP_BEARER_SERVICE

Enum of type RMobileCall::TMobileCallDataService.

Field type: TUint32. This field may be left as NULL.

ISP_BEARER_PROTOCOL

Enum of type RMobileCall::TMobileCallDataProtocol.

Field type: TUint32. This field may be left as NULL.

ISP_RLP_VERSION

Enum of type RMobileCall::TMobileCallDataRLPVersion.

Field type: TUint32. This field may be left as NULL.

ISP_IWF_TO_MS

Integer specifying network to MS window size.

Field type: TUint32. This field may be left as NULL.

ISP_MS_TO_IWF

Integer specifying MS to network window size.

Field type: TUint32. This field may be left as NULL.

ISP_ACK_TIMER

Integer specifying rlp ack timeout in microseconds.

Field type: TUint32. This field may be left as NULL.

ISP_RETRANSMISSION_ATTEMPTS

Integer specifying rlp retransmission attempts.

Field type: TUint32. This field may be left as NULL.

ISP_RESEQUENCE_PERIOD

Integer specifying resequencing period.

Field type: TUint32. This field may be left as NULL.

ISP_V42_COMPRESSION

Enum of type RMobileCall::TMobileCallDataV42bis.

Field type: TUint32. This field may be left as NULL.

ISP_V42_CODEWORDS

Integer specifying V42bis codewords.

Field type: TUint32. This field may be left as NULL.

ISP_V42_MAX_LENGTH

Integer specifying V42bis maximum string length.

Field type: TUint32. This field may be left as NULL.

ISP_ASYMMETRY

Enum of type RMobileCall::TMobileCallAsymmetry for HSCSD.

Field type: TUint32. This field may be left as NULL.

ISP_USER_INIT_UPGRADE

HSCSD parameter - user init upgrade?

Field type: TBool. This field may be left as NULL.

ISP_USE_EDGE

Use edge?

Field type: TBool. This field may be left as NULL.

GPRS_APN

Access point name.

Field type: Text. This field may be left as NULL.

GPRS_PDP_TYPE

PDP (Packet Data Protocol, e.g. IP) type.

Field type: TUint32. This field may not be left as NULL.

GPRS_PDP_ADDRESS

PDP address of the phone.

Field type: Text. This field may be left as NULL.

GPRS_REQ_PRECEDENCE

Requested quality of service precedence class.

Field type: TUint32 from RPacketQoS::TQoSPrecedence. This field may be left as NULL.

GPRS_REQ_DELAY

Requested quality of service delay class.

Field type: TUint32 from RPacketQoS::TQoSDelay. This field may be left as NULL.

GPRS_REQ_RELIABILITY

Requested quality of service reliability class.

Field type: TUint32 from RPacketQoS::TQoSReliability. This field may be left as NULL.

GPRS_REQ_PEAK_THROUGHPUT

Requested quality of service peak throughput.

Field type: TUint32 from RPacketQoS::TQoSPeakThroughput. This field may be left as NULL.

GPRS_REQ_MEAN_THROUGHPUT

Requested quality of service mean throughput class.

Field type: TUint32 from RPacketQoS::TQoSMeanThroughput. This field may be left as NULL.

GPRS_MIN_PRECEDENCE

Minimum quality of service precedence class.

Field type: TUint32 from RPacketQoS::TQoSPrecedence. This field may be left as NULL.

GPRS_MIN_DELAY

Minimum quality of service delay class.

Field type: TUint32 from RPacketQoS::TQoSDelay. This field may be left as NULL.

GPRS_MIN_RELIABILITY

Minimum quality of service reliability class.

Field type: TUint32 from RPacketQoS::TQoSReliability. This field may be left as NULL.

GPRS_MIN_PEAK_THROUGHPUT

Minimum quality of service peak throughput class.

Field type: TUint32 from RPacketQoS::TQoSMeanThroughput. This field may be left as NULL.

GPRS_MIN_MEAN_THROUGHPUT

Minimum quality of service mean throughput class.

Field type: TUint32 from RPacketQoS::TQoSMeanThroughput. This field may be left as NULL.

GPRS_DATA_COMPRESSION

Whether data compression is on.

Field type: TBool. This field may be left as NULL.

GPRS_HEADER_COMPRESSION

Whether IP header compression is on.

Field type: TBool. This field may be left as NULL.

GPRS_R5_DATA_COMPRESSION

Whether data compression is on and what type of compression should be used when using UMTS R5 Field type: TDataCompression. This field may be left as NULL.

GPRS_R5_HEADER_COMPRESSION

Whether IP header compression is on and what type of compression should be used when using UMTS R5 Field type: THeaderCompression. This field may be left as NULL.

GPRS_R4_PACKET_FLOW_IDENTIFIER

Packet flow indicator - See table 10.5.161 of TS 24.008 Field type: TPacketFlowIdentifier. This field may be left as NULL.

GPRS_UMTS_GPRS_RELEASE

Identifies the current UMTS/GPRS release in use. Field type: TUmtsGprsRelease. This field may be left as NULL.

GPRS_ANONYMOUS_ACCESS

Whether use of anonymous access is on.

Field type: TBool. This field may be left as NULL.

GPRS_USE_EDGE

Use edge?

Field type: TBool. This field may be left as NULL.

GPRS_IF_PARAMS

Interface parameter string.

Field type: Text. This field may be left as NULL.

GPRS_IF_NETWORKS

Comma separated list of network protocols, e.g. "PPP".

Field type: Text. This field may be left as NULL.

GPRS_IF_PROMPT_FOR_AUTH

Whether to prompt user for authentication username and password.

Field type: TBool. This field may not be left as NULL.

GPRS_IF_AUTH_NAME

Authentication username used by PPP.

Field type: Text. This field may be left as NULL.

GPRS_IF_AUTH_PASS

Authentication password used by PPP.

Field type: Text. This field may be left as NULL.

GPRS_IF_AUTH_RETRIES

Number of times to retry authentication if it fails.

Field type: TUint32. This field may be left as NULL.

GPRS_IP_NETMASK

IP net mask of interface.

Field type: Text. This field may be left as NULL.

GPRS_IP_GATEWAY

IP address of the gateway.

Field type: Text. This field may be left as NULL.

GPRS_IP_ADDR_FROM_SERVER

Whether to get IP addresses (for the Symbian phone) from the server.

Field type: TBool. This field may not be left as NULL.

GPRS_IP_ADDR

IP address of the Symbian phone

Field type: Text. This field may be left as NULL.

GPRS_IP_DNS_ADDR_FROM_SERVER

Whether to get DNS addresses from the server.

Field type: TBool. This field may not be left as NULL.

GPRS_IP_NAME_SERVER1

IP address of the primary name server.

Field type: Text. This field may be left as NULL.

GPRS_IP_NAME_SERVER2

IP address of the secondary name server.

Field type: Text. This field may be left as NULL.

GPRS_IP6_DNS_ADDR_FROM_SERVER

GPRS_IP6_NAME_SERVER1

GPRS_IP6_NAME_SERVER2

GPRS_IP_ADDR_LEASE_VALID_FROM

GPRS_IP_ADDR_LEASE_VALID_TO

GPRS_CONFIG_DAEMON_MANAGER_NAME

Name of the ECOM configuration daemon manager component. This component interfaces with the server identified in GPRS_CONFIG_DAEMON_NAME. If specified, GPRS_CONFIG_DAEMON_NAME should also be specified.

Field type: Text. This field may be left as NULL.

GPRS_CONFIG_DAEMON_NAME

Name of the configuration daemon server. This server is used to provide further configuration for a connection, e.g. dynamic IP address assignment. If specified, GPRS_CONFIG_DAEMON_MANAGER_NAME should also be specified.

Field type: Text. This field may be left as NULL.

GPRS_ENABLE_LCP_EXTENSIONS

Whether to enable LCP extensions.

Field type: TBool. This field may be left as NULL.

GPRS_DISABLE_PLAIN_TEXT_AUTH

Whether to disable plain text authentication.

Field type: TBool. This field may be left as NULL.

GPRS_AP_TYPE

Service supports Internet only, WAP only or both.

Field type: TUint32. This field may be left as NULL.

GPRS_QOS_WARNING_TIMEOUT

If the requested QOS can not be satisfied warn the user after this time in microseconds. Set to 0xffffffff to disable.

Field type: TUint32. This field may be left as NULL.

QOS_UMTS_R99_AND_ON_TABLE

Link to the Gprs R99 Parameters Table Field type: TUint32. This field may be left as NULL

GPRS_QOS_REQ_TRAFFIC_CLASS

GPRS_QOS_MIN_TRAFFIC_CLASS

GPRS_QOS_REQ_DELIVERY_ORDER

GPRS_QOS_MIN_DELIVERY_ORDER

GPRS_QOS_REQ_DELIVER_ERRONEOUS_SDU

GPRS_QOS_MIN_DELIVER_ERRONEOUS_SDU

GPRS_QOS_REQ_MAX_SDUSIZE

GPRS_QOS_MIN_ACCEPTABLE_MAX_SDU_SIZE

GPRS_QOS_REQ_MAX_UPLINK_RATE

GPRS_QOS_REQ_MIN_UPLINK_RATE

GPRS_QOS_REQ_MAX_DOWNLINK_RATE

GPRS_QOS_REQ_MIN_DOWNLINK_RATE

GPRS_QOS_REQ_BER

GPRS_QOS_MAX_BER

GPRS_QOS_REQ_SDU_ERROR_RATIO

GPRS_QOS_MAX_SDU_ERROR_RATIO

GPRS_QOS_REQ_TRAFFIC_HANDLING_PRIORITY

GPRS_QOS_MIN_TRAFFIC_HANDLING_PRIORITY

GPRS_QOS_REQ_TRANSFER_DELAY

GPRS_QOS_MAX_TRANSFER_DELAY

GPRS_QOS_REQ_GUARANTEED_UPLINK_RATE

GPRS_QOS_MIN_GUARANTEED_UPLINK_RATE

GPRS_QOS_REQ_GUARANTEED_DOWNLINK_RATE

GPRS_QOS_MIN_GUARANTEED_DOWNLINK_RATE

GPRS_QOS_SIGNALLING_INDICATION

GPRS_QOS_IM_CN_SIGNALLING_INDICATOR

GPRS_QOS_SOURCE_STATISTICS_DESCRIPTOR

LAN_IF_NETWORKS

LAN_IP_NETMASK

LAN_IP_GATEWAY

LAN_IP_ADDR_FROM_SERVER

LAN_IP_ADDR

LAN_IP_DNS_ADDR_FROM_SERVER

LAN_IP_NAME_SERVER1

LAN_IP_NAME_SERVER2

LAN_IP6_DNS_ADDR_FROM_SERVER

LAN_IP6_NAME_SERVER1

LAN_IP6_NAME_SERVER2

LAN_IP_ADDR_LEASE_VALID_FROM

LAN_IP_ADDR_LEASE_VALID_TO

LAN_CONFIG_DAEMON_MANAGER_NAME

LAN_CONFIG_DAEMON_NAME

LAN_SERVICE_EXTENSION_TABLE_NAME

used when Bluetooth PAN profile or WLAN is in use

LAN_SERVICE_EXTENSION_TABLE_RECORD_ID

PAN_LOCAL_ROLE

PAN role that the local device will act in. To dynamically select a role, use ECommDbPanRoleUnknown. Field type: TCommDbBluetoothPanRole.

PAN_PEER_ROLE

PAN role that the remote device will act in. To dynamically select a role, use ECommDbPanRoleUnknown. Field type: TCommDbBluetoothPanRole.

PAN_PEER_MAC_ADDRESSES

A list of Bluetooth MAC addresses. If one address is specified, then PAN agent will connect to it. If more than one device address is specified (in a comma seperated list), then PAN agent will discover whether any of the devices are in range, and connect to one of them. Field type: Comma-separated list of Bluetooth MAC addresses, with no "0x" preamble and no colons separating the digits

PAN_PROMPT_FOR_REMOTE_DEVICES

Whether the agent should prompt the user to select the remote devices to which we will connect. Field type: TBool

PAN_DISABLE_SDP_QUERY

Whether the remote role defined above should be accepted without performing an SDP query to ensure the remote device supports the specified role. Not recommended for use. Field type: TBool

PAN_ALLOW_INCOMING

Whether the PAN agent should support incoming connections. Field type: TBool

PAN_PROMPT_IF_MAC_LIST_FAILS

Whether the agent should prompt the user to select the remote device to which we will connect if we cannot connect to any device specified in the MAC list. Field type: TBool

PAN_NAP_SERVICE_ENABLED

Whether the device is enabled for NAP service (to be used as a modem) for a particular connection Field type: TBool

AGENT_NAME

Columns of all bearer tables

LAST_SOCKET_ACTIVITY_TIMEOUT

LAST_SESSION_CLOSED_TIMEOUT

LAST_SOCKET_CLOSED_TIMEOUT

BAD_CONNECTION_MONITORING_TIMEOUT

BAD_CONNECTION_MONITORING_PACKET_COUNT

MODEM_AGENT

Agent identifier.

Field type: TUint32. This field may be left as NULL.

MODEM_NIF_NAME

NIF name.

Field type: Text. This field may be left as NULL.

MODEM_BCA_STACK

BCA (Baseband Channel Adaptor) Stack.

Field type: Text. This field may be left as NULL.

MODEM_PORT_NAME

Comm port name.

Field type: Text. This field may be left as NULL.

MODEM_CONTROL_CHANNEL_PORT_NAME

The modem control channel port name.

Field type: Text. This field may be left as NULL.

MODEM_TSY_NAME

TSY name.

Field type: Text. This field may be left as NULL.

MODEM_CSY_NAME

CSY name.

Field type: Text. This field may be left as NULL.

MODEM_DATA_BITS

Data bits (TDataBits value).

Field type: TUint8. This field may not be left as NULL.

MODEM_STOP_BITS

Stop bits.

This is a TStopBits value.

Field type: TUint8. This field may not be left as NULL.

MODEM_PARITY

Parity.

This is a TParity value.

Field type: TUint8. This field may not be left as NULL.

MODEM_RATE

Baud rate.

This is a TBps value.

Field type: TUint32. This field may not be left as NULL.

MODEM_HANDSHAKING

Handshaking.

Field type: TUint32. This field may be left as NULL.

MODEM_SPECIAL_RATE

Special rate.

Field type: TUint32. This field may be left as NULL.

MODEM_XON_CHAR

Xon character.

Field type: TUint8. This field may be left as NULL.

MODEM_XOFF_CHAR

Xoff Character.

Field type: TUint8. This field may be left as NULL.

MODEM_FAX_CLASS_PREF

Preferred fax class.

This is a TFaxClass value.

Field type: TUint8. This field may not be left as NULL.

MODEM_SPEAKER_PREF

Preferred speaker mode.

This is a TCommsDbModemSpeakerSetting value.

Field type: TUint8. This field may not be left as NULL.

MODEM_SPEAKER_VOL_PREF

Preferred speaker volume.

This is a TCommsDbModemSpeakerVolume value.

Field type: TUint8. This field may not be left as NULL.

MODEM_MODEM_INIT_STRING

General modem initialisation string

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_DATA_INIT_STRING

Data initialisation string

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_FAX_INIT_STRING

Fax initialisation string.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_ISP_INIT_STRING

ISP Initialisation string. This field is written from the ISP_INIT_STRING. Should not be accessed by user.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_DIAL_PAUSE_LENGTH

Command to modify the pause created during dialling using the comma character (',')

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_CARRIER_TIMEOUT

Command to set the time out the modem uses when establishing a link before giving up and returning to command mode.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_AUTO_ANSWER_RING_COUNT

Command to set the number of rings before the modem auto answers.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_SPEAKER_VOL_CONTROL_LOW

Command to set the modem speaker volume to low.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_SPEAKER_VOL_CONTROL_MEDIUM

Command to set the modem speaker volume to medium.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_SPEAKER_VOL_CONTROL_HIGH

Command to set the modem speaker volume to high.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_SPEAKER_ALWAYS_OFF

Command to set the modem speaker off.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_SPEAKER_ON_UNTIL_CARRIER

Command to set the modem speaker on until the carrier.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_SPEAKER_ALWAYS_ON

Command to set the modem speaker on

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_SPEAKER_ON_AFTER_DIAL_UNTIL_CARRIER

Command to set the modem speaker on except during dialling.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_DIAL_TONE_WAIT_MODIFIER

The dial command modifier to wait for dial tone.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_CALL_PROGRESS_1

Disable busy and dial tone detection.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_CALL_PROGRESS_2

Dial tone detection enabled, busy detection disabled.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_CALL_PROGRESS_3

Dial tone detection disabled, busy detection enabled.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_CALL_PROGRESS_4

Dial tone and busy detection enabled.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_ECHO_OFF

Switch echo mode off.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_VERBOSE_TEXT

Switch verbose mode on.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_QUIET_ON

Switch quiet mode on.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_QUIET_OFF

Switch quiet mode off.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_DIAL_COMMAND_STATE_MODIFIER

Dial command modifier to return to command mode after dialling.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_ON_LINE

Enter on-line mode from on-line command mode.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_RESET_CONFIGURATION

Reset the modem configuration.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_RETURN_TO_FACTORY_DEFS

Return the modem configuration to its factory defaults.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_DCD_ON_DURING_LINK

Command the modem to only assert DCD when a carrier is actually detected, i.e. while the link is up.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_DTR_HANG_UP

Command the modem to hang up the current call when the DTE drops the DTR line.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_DSR_ALWAYS_ON

Command the modem to always assert DSR.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_RTS_CTS_HANDSHAKE

Command the modem to use RTS/CTS flow control.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_XON_XOFF_HANDSHAKE

Command the modem to use software flow control.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_ESCAPE_CHARACTER

The character used by the DTE to return to command mode from on-line mode.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_ESCAPE_GUARD_PERIOD

Command the modem to use a particular escape sequence guard period.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_FAX_CLASS_INTERROGATE

Ask the modem which fax modes are supported.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_FAX_CLASS

Set the fax mode.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_NO_DIAL_TONE

Modem response when no dial tone is detected.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_BUSY

Modem response when a busy tone is detected.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_NO_ANSWER

Modem response when no answer is detected.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_CARRIER

Carrier report message.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_CONNECT

Connection report message.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_COMPRESSION_CLASS_5

Compression Class 5 report message.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_COMPRESSION_V42BIS

Compression V.42 bis report message.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_COMPRESSION_NONE

No compression report message.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_PROTOCOL_LAPD

LAPD protocol report message.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_PROTOCOL_ALT

ALT protocol report message.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_PROTOCOL_ALTCELLULAR

ALT-CELLULAR report message.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_PROTOCOL_NONE

No protocol report message.

Field type: 8-Bit Text. This field may be left as NULL.

MODEM_MESSAGE_CENTRE_NUMBER

Phone number of message centre.

Field type: TUint16. This field may be left as NULL.

MODEM_MESSAGE_VALIDITY_PERIOD

Validity period for SMS in minutes.

Field type: TUint32. This field may be left as NULL.

MODEM_MESSAGE_DELIVERY_REPORT

Whether to produce an SMS delivery report.

Field type: TBool. This field may be left as NULL.

MODEM_MIN_SIGNAL_LEVEL

Minimum signal level.

Field type: TUint32. This field may not be left as NULL.

MODEM_SIR_SETTINGS

SIR settings. Field type: TUint32. This field may be left as NULL.

MODEM_COMM_ROLE

Whether comm port should be opened in the role of DTE or DCE Contents is a bit mask (see KModemCommRoleDCE)

Field type: TUint32. This field may be left as NULL.

BEARER_TECHNOLOGY

LAN_BEARER_AGENT

LAN_BEARER_NIF_NAME

LAN_BEARER_LDD_FILENAME

LAN_BEARER_LDD_NAME

LAN_BEARER_PDD_FILENAME

LAN_BEARER_PDD_NAME

LAN_BEARER_PACKET_DRIVER_NAME

LOCATION_INTL_PREFIX_CODE

International prefix code.

Field type: Text. This field may be left as NULL.

LOCATION_NAT_PREFIX_CODE

National prefix code.

Field type: Text. This field may be left as NULL.

LOCATION_NAT_CODE

National code.

Field type: Text. This field may be left as NULL.

LOCATION_AREA_CODE

Area code.

Field type: Text. This field may be left as NULL.

LOCATION_DIAL_OUT_CODE

Number to dial for an outside line.

Field type: Text. This field may be left as NULL.

LOCATION_DISABLE_CALL_WAITING_CODE

Code to dial to disable call waiting facility.

Field type: Text. This field may be left as NULL.

LOCATION_MOBILE

Mobile phone?

Field type: TBool. This field may not be left as NULL.

LOCATION_USE_PULSE_DIAL

Use pulse dialling?

Field type: TBool. This field may not be left as NULL.

LOCATION_WAIT_FOR_DIAL_TONE

Wait for the dial tone?

Field type: TBool. This field may not be left as NULL.

LOCATION_PAUSE_AFTER_DIAL_OUT

Pause time after dial out.

Field type: TUint32. This field may not be left as NULL.

CHARGECARD_ACCOUNT_NUMBER

Account number.

Field type: Text. This field may be left as NULL.

CHARGECARD_PIN

PIN number.

Field type: Text. This field may be left as NULL.

CHARGECARD_LOCAL_RULE

Order of dialling account number, PIN and phone number for local calls.

Field type: Text. This field may be left as NULL.

CHARGECARD_NAT_RULE

Order of dialling account number, PIN and phone number for national calls.

Field type: Text. This field may be left as NULL.

CHARGECARD_INTL_RULE

Order of dialling account number, PIN and phone number for international calls.

Field type: Text. This field may be left as NULL.

PROXY_ISP

Identifier of the associated ISP record.

Field type: TUint32. This field may not be left as NULL.

PROXY_SERVICE_TYPE

The table from which the PROXY_ISP has been taken.

This is necessary as GPRS records as well as ISP records can have proxy settings associated with them.

If this field is read and its length is zero, the value DIAL_OUT_ISP is returned, as it is assumed that any client that has not written this field is assuming that proxies are only available to the dial out ISP and not other service types.

Field type: Text. This field may be left as NULL.

PROXY_USE_PROXY_SERVER

Use proxy server?

Field type: TBool. This field may not be left as NULL.

PROXY_SERVER_NAME

Name of the host.

Field type: Long Text. This field may be left as NULL.

PROXY_PROTOCOL_NAME

Name of the protocol for which this proxy can be used.

Field type: Text. This field may not be left as NULL.

PROXY_PORT_NUMBER

Port number.

Field type: TUint32. This field may be left as NULL.

PROXY_EXCEPTIONS

Semi-colon separated list of the addresses for which the proxy server should not be used.

Field type: Long Text. This field may be left as NULL.

WAP_CURRENT_BEARER

Text string indicating the name of the table from which to read the bearer information.

This can be WAP_IP_BEARER or WAP_SMS_BEARER.

Field type: Text. This field may not be left as NULL.

WAP_START_PAGE

WAP start page URL.

Field type: Text. This field may be left as NULL.

WAP_ACCESS_POINT_ID

ID of the WAP Access Point record to which this bearer information refers.

Field type: TUint32. This field may not be left as NULL.

WAP_GATEWAY_ADDRESS

WAP gateway address: an IP address or phone number.

Field type: Text. This field may be left as NULL.

WAP_WSP_OPTION

Whether connection-oriented or connectionless API should be used.

This is a TCommsDbWapWspOption value.

Field type: TUint8. This field may be left as NULL.

WAP_SECURITY

Attempt secure WTLS connection to the gateway.

Field type: TBool. This field may be left as NULL.

WAP_IAP

Identifier of a record in the IAP table to be used.

Field type: TUint32. This field may be left as NULL.

WAP_PROXY_PORT

Proxy port number. Required for WAP2.0 only.

Field type: TUint32. This field may not be left as NULL.

WAP_PROXY_LOGIN_NAME

Proxy login name. Required for WAP2.0 only.

Field type: Text. This field may be left as NULL.

WAP_PROXY_LOGIN_PASS

Proxy login password. Required for WAP2.0 only.

Field type: Text. This field may be left as NULL.

WAP_SERVICE_CENTRE_ADDRESS

Service Centre Address.

Field type: Text. This field may be left as NULL.

BT_DEV_ADD

Bluetooth device address.

Field type: 8-bit Text. This field may not be left as NULL.

BT_DEV_DFLT_NAME

Bluetooth device default name.

Field type: Long text. This field may be left as NULL.

BT_DEV_FRIENDLY_NAME

Bluetooth device friendly name.

Field type: Long text. This field may be left as NULL.

BT_DEVICE_CLASS

Bluetooth device class.

Field type: TUint32. This field may be left as NULL.

BT_LINKKEY

Bluetooth Link key.

Field type: 8-bit Text. This field may be left as NULL.

BT_DEV_STATE

Bluetooth device state.

Field type: TUint32. This field may not be left as NULL.

BT_DEVICE_GLOBAL_SECURITY

Bluetooth device global security setting.

Field type: TUint32. This field may be left as NULL.

BT_PAGE_SCAN_REP_MODE

Bluetooth page scan repetition mode.

Field type: TUint32. This field may be left as NULL.

BT_PAGE_SCAN_PERIOD_MODE

Field type: TUint32. This field may be left as NULL.

BT_PAGE_SCAN_MODE

Field type: TUint32. This field may be left as NULL.

BT_SPARE

Internal

BT_CLK_OFFSET

Bluetooth clock offset.

Field type: TUint32. This field may be left as NULL.

BT_COD

Bluetooth class of device.

Field type: TUint32. This field may be left as NULL.

BT_SEC_UID

Bluetooth security UID.

Field type: TUint32. This field may be left as NULL.

BT_SEC_DEVICE_SECURITY

Bluetooth security device.

Field type: TUint32. This field may be left as NULL.

BT_DFLT_SER_NAME

Bluetooth default service name.

Field type: Text. This field may be left as NULL.

BT_DFLT_SER_UUID

Bluetooth default service ID.

Field type: TUint32. This field may not be left as NULL.

BT_DFLT_DEV_ADD

Bluetooth default device address.

Field type: 8-bit Text. This field may not be left as NULL.

BT_DFLT_VIRTUAL_PORT

Bluetooth default virtual port number.

Field type: TUint32. This field may not be left as NULL.

BT_DFLT_SECURITY_LEVEL

Bluetooth default security level.

Field type: TUint8. This field may be left as NULL.

BT_PERSIST_COD

BT_PERSIST_PAGE_TIMEOUT

BT_PERSIST_PAGE_SCAN_INTERVAL

BT_PERSIST_PAGE_SCAN_WINDOW

BT_PERSIST_INQUIRY_SCAN_INTERVAL

BT_PERSIST_INQUIRY_SCAN_WINDOW

BT_PERSIST_HOLD_MODE_ACTIVITY

BT_PERSIST_SCO_FLOW_CONTROL

BT_PERSIST_PAGE_SCAN_PERIOD

BT_PERSIST_PAGE_SCAN_MODE

BT_PERSIST_POWER_SETTINGS

BT_PERSIST_SCAN

BT_PERSIST_LOCAL_NAME

BT_PERSIST_IAC_LAP

BT_PERSIST_STATE

SS_PROTO_NAME

Secure Sockets protocol name.

Field type: Text. This field may not be left as NULL.

SS_PROTO_LIBRARY

Secure Sockets protocol library.

Field type: Text. This field may not be left as NULL.

DEFAULT_GPRS_USAGE

Specifies usage of this default.

Field type: TUint32. This field may be left as NULL.

DEFAULT_GPRS_APN

Default access point name.

Field type: Text. This field may not be left as NULL.

DEFAULT_GPRS_PDP_TYPE

Default PDP type (e.g. IP4).

The enum RPacketContext::TProtocolType defines valid values for this field.

Field type: TUint32. This field may not be left as NULL.

DEFAULT_GPRS_PDP_ADDRESS

Default PDP address.

Field type: Text. This field may not be left as NULL.

DEFAULT_GPRS_PRECEDENCE

Default quality of service precedence class.

Values for this are defined by the enum RPacketQoS::TQoSPrecedence.

Field type: TUint32. This field may be left as NULL.

DEFAULT_GPRS_DELAY

Default quality of service delay class.

Values for this are defined by the enum RPacketQoS::TQoSDelay.

Field type: TUint32. This field may be left as NULL.

DEFAULT_GPRS_RELIABILITY

Default quality of service reliability class.

Values for this are defined by the enum RPacketQoS::TQoSReliability.

Field type: TUint32. This field may be left as NULL.

DEFAULT_GPRS_PEAK_THROUGHPUT

Default quality of service peak throughput class.

Values for this are defined by the enum RPacketQoS::TQoSPeakThroughput.

Field type: TUint32. This field may be left as NULL.

DEFAULT_GPRS_MEAN_THROUGHPUT

Default quality of service mean throughput class.

Values for this are defined by the enum RPacketQoS::TQoSMeanThroughput.

Field type: TUint32. This field may be left as NULL.

DEFAULT_GPRS_MIN_PRECEDENCE

DEFAULT_GPRS_MIN_DELAY

Minimum quality of service delay class.

Values for this are defined by the enum RPacketQoS::TQoSDelay.

Field type: TUint32. This field may be left as NULL.

DEFAULT_GPRS_MIN_RELIABILITY

Default minimum quality of service reliability class.

Values for this are defined by the enum RPacketQoS::TQoSReliability.

Field type: TUint32. This field may be left as NULL.

DEFAULT_GPRS_MIN_PEAK_THROUGHPUT

Default minimum quality of service peak throughput class.

Values for this are defined by the enum RPacketQoS::TQoSMeanThroughput.

Field type: TUint32. This field may be left as NULL.

DEFAULT_GPRS_MIN_MEAN_THROUGHPUT

Default minimum quality of service mean throughput class.

Values for this are defined by the enum RPacketQoS::TQoSMeanThroughput.

Field type: TUint32. This field may be left as NULL.

DEFAULT_GPRS_DATA_COMPRESSION

Default value for whether data compression is on.

Field type: TBool. This field may be left as NULL.

DEFAULT_GPRS_HEADER_COMPRESSION

Default value for whether IP header compression is on.

Field type: TBool. This field may be left as NULL.

DEFAULT_GPRS_ANONYMOUS_ACCESS

Default value for whether use of anonymous access is on.

Field type: TBool. This field may be left as NULL.

DEFAULT_GPRS_USE_EDGE

Default value for EDGE parameter

Field type: TBool. This field may be left as NULL.

AGENT_FRIENDLY_NAME

The Agent's name.

Field type: Text. This field may not be left as NULL.

AGENT_FILENAME

The internal file location of the agent.

Field type: Text. This field may not be left as NULL.

CDMA_IWF_NAME

CDMA_SERVICE_OPTION

Mask indicating valid service options.

Field type: TUint32 from RPacketContext::TServiceOption. This field may not be left as NULL.

CDMA_PDP_TYPE

PDP type. (IPv4 or IPv6).

Field type: TUint32 from RPacketContext::TProtocolType. This field may not be left as NULL.

CDMA_PDP_ADDRESS

PDP address of phone.

Field type: Text. This field may be left as NULL.

CDMA_REQ_FWD_PRIORITY

Requested forward priority.

Field type: TUint32 from RPacketQoS::TQoSLinkPriority. This field may be left as NULL.

CDMA_REQ_REV_PRIORITY

Requested reverse priority.

Field type: TUint32 from RPacketQoS::TQoSLinkPriority. This field may be left as NULL.

CDMA_REQ_FWD_BITRATE

Requested forward bitrate.

Field type: TUint32 from RPacketQoS::TQoSDataRate. This field may be left as NULL.

CDMA_REQ_REV_BITRATE

Requested reverse bitrate.

Field type: TUint32 from RPacketQoS::TQoSDataRate. This field may be left as NULL.

CDMA_REQ_FWD_LOSS

Requested forward frame loss rate.

Field type: TUint32 from RPacketQoS::TQoSDataLoss. This field may be left as NULL.

CDMA_REQ_REV_LOSS

Requested reverse frame loss rate.

Field type: TUint32 from RPacketQoS::TQoSDataLoss. This field may be left as NULL.

CDMA_REQ_FWD_MAXDELAY

Requested forward delay.

Field type: TUint32 from RPacketQoS::TQoSDelay. This field may be left as NULL.

CDMA_REQ_REV_MAXDELAY

Requested reverse delay.

Field type: TUint32 from RPacketQoS::TQoSDelay. This field may be left as NULL.

CDMA_MIN_FWD_BITRATE

Minimum acceptable forward bitrate.

Field type: TUint32 from RPacketQoS::TQoSDataRate. This field may be left as NULL.

CDMA_MIN_REV_BITRATE

Minimum acceptable reverse bitrate.

Field type: TUint32 from RPacketQoS::TQoSDataRate. This field may be left as NULL.

CDMA_ACCPT_FWD_LOSS

Maximum acceptable forward frame loss rate.

Field type: TUint32 from RPacketQoS::TQoSDataLoss. This field may be left as NULL.

CDMA_ACCPT_REV_LOSS

Maximum acceptable forward frame loss rate.

Field type: TUint32 from RPacketQoS::TQoSDataLoss. This field may be left as NULL.

CDMA_ACCPT_FWD_MAXDELAY

Maximum acceptable forward delay.

Field type: TUint32 from RPacketQoS::TQoSDelay. This field may be left as NULL.

CDMA_ACCPT_REV_MAXDELAY

Maximum acceptable reverse delay.

Field type: TUint32 from RPacketQoS::TQoSDelay. This field may be left as NULL.

CDMA_DATA_COMPRESSION

Data compression on?

Field type: TBool. This field may be left as NULL.

CDMA_ENABLE_IP_HEADER_COMP

Van Jacobson IP header compression on?

Field type: TBool. This field may be left as NULL.

CDMA_ANONYMOUS_ACCESS

Use anonymous access on?

Field type: TBool. This field may be left as NULL.

CDMA_IF_PARAMS

Interface parameter string.

Field type: Text. This field may be left as NULL.

CDMA_IF_NETWORKS

Comma separated list of network protocols, e.g. "PPP".

Field type: Text. This field may be left as NULL.

CDMA_IF_EXTERN_IP_CONFIG_ALWAYS_REJECT_AUTH

Always reject PPP peer authentication requests when using external IP configuration.

Field type: TBool. This field may be left as NULL.

CDMA_IF_PROMPT_FOR_AUTH

Prompt user for authentication username and password?

Field type: TBool. This field may not be left as NULL.

CDMA_IF_AUTH_NAME

Authentication username used by PPP in the Simple IP case or by the Mobile IP implementation when Mobile IP is enabled.

Field type: Text. This field may be left as NULL.

CDMA_IF_AUTH_PASS

Authentication password used by PPP.

Field type: Text. This field may be left as NULL.

CDMA_IF_AUTH_RETRIES

Number of times to retry authentication if it fails.

Field type: TUint32. This field may be left as NULL.

CDMA_IP_NETMASK

IP Net mask of Symbian OS mobile network interface.

Field type: Text. This field may be left as NULL.

CDMA_IP_GATEWAY

IP address of gateway.

Field type: Text. This field may be left as NULL.

CDMA_IP_ADDR_FROM_SERVER

Get IP addresses (for Symbian OS mobile) from server?

Field type: TBool. This field may not be left as NULL.

CDMA_IP_ADDR

IP address (of Symbian OS mobile), to be used by PPP and TCP/IP.

Field type: Text. This field may be left as NULL.

CDMA_IP_DNS_ADDR_FROM_SERVER

Get DNS addresses from server?

Field type: TBool. This field may not be left as NULL.

CDMA_IP_NAME_SERVER1

IP Address of primary name server.

Field type: Text. This field may be left as NULL.

CDMA_IP_NAME_SERVER2

IP Address of secondary name server.

Field type: Text. This field may be left as NULL.

CDMA_IP6_DNS_ADDR_FROM_SERVER

Get IP6 DNS address from Server?

Field type: TBool. This field may be left as NULL.

CDMA_IP6_NAME_SERVER1

IP6 address of the primary name server

Field type: Text. This field may be left as NULL.

CDMA_IP6_NAME_SERVER2

IP6 address of the secondary name server

Field type: Text. This field may be left as NULL.

CDMA_IP_ADDR_LEASE_VALID_FROM

IP address valid from this time, used to store dynamically assigned address lease info.

Field type: Text. This field may be left as NULL.

CDMA_IP_ADDR_LEASE_VALID_TO

IP address valid to this time, used to store dynamically assigned address lease info.

Field type: Text. This field may be left as NULL.

CDMA_CONFIG_DAEMON_MANAGER_NAME

Name of the ECOM configuration daemon manager component. This component interfaces with the server identified in CDMA_CONFIG_DAEMON_NAME. If specified, CDMA_CONFIG_DAEMON_NAME should also be specified.

Field type: Text. This field may be left as NULL.

CDMA_CONFIG_DAEMON_NAME

Name of the configuration daemon server. This server is used to provide further configuration for a connection, e.g. dynamic IP address assignment. If specified, CDMA_CONFIG_DAEMON_MANAGER_NAME should also be specified.

Field type: Text. This field may be left as NULL.

CDMA_ENABLE_LCP_EXTENSIONS

Enable LCP extensions?

Field type: TBool. This field may be left as NULL.

CDMA_DISABLE_PLAIN_TEXT_AUTH

Disable plain text authentication?

Field type: TBool. This field may be left as NULL.

CDMA_AP_TYPE

Service supports Internet only, WAP only or both.

Field type: TUint32 from TCommsDbIspType. This field may be left as NULL.

CDMA_QOS_WARNING_TIMEOUT

Notify user if the requested QOS can not be satisfied for this time in microseconds. Set to 0xffffffff to disable.

Field type: TUint32. This field may be left as NULL.

CDMA_RLP_MODE

Transparent or non-transparent radio link protocol.

Field type: TUint32 from RPacketQoS::TRLPMode. This field may not be left as NULL.

CDMA_MIP

Attempt to use the mobile IP protocol.

Field type: TBool. This field may be left as NULL.

CDMA_MIP_HA_ADDRESS

Home agent address.

Field type: Text. This field may be left as NULL.

CDMA_MIP_TIMEOUT

A normal reconnect (informing the user) takes place if not both the PPP link drops and a change in SID or NID is received with in this time (in milliseconds). If they do, an automatic reconnect takes place.

Field type: TUint32 This field may be left as NULL.

CDMA_NAI_TYPE

Defines the type of NAI this record refers to (SimpleIP or MobileIP). Possible values: ECommDbCdmaNaiSimpleIp, ECommDbCdmaNaiMobileIp. Replaces the CDMA_MIP field.

Field type: TUint32. This field must not be left as NULL.

CDMA_SIMIP_AUTH_ALGORITHM

SimpleIP authentication algorithm. Possible values (TCommDbCdmaSimpIpAuthAlgorithm):

0000 - No authentication

0001 - PPP CHAP authentication

0002 - PPP PAP authentication

0003 - PPP CHAP to PAP fallback

Field type: TUint32, for the enum TCommDbCdmaSimpIpAuthAlgorithm. This field may be left as NULL.

CDMA_SIMIP_PAP_SS_HANDLE

SimpleIP PAP shared secret handle

Field type: TUint32. This field may be left as NULL.

CDMA_SIMIP_CHAP_SS_HANDLE

SimpleIP CHAP shared secret handle

Field type: TUint32. This field may be left as NULL.

CDMA_MIP_T_BIT

Reverse-tunnelling required flag.

Field type: TUint32. This field may be left as NULL.

CDMA_MIP_HOME_ADDRESS

Home address associated with the Mobile Station.

Field type: Text. This field may be left as NULL.

CDMA_MIP_PRIMARY_HOME_AGENT

IP address of the mobile node's primary home agent. Replaces the CDMA_MIP_HA_ADDRESS field.

Field type: Text. This field may be left as NULL.

CDMA_MIP_SECONDARY_HOME_AGENT

IP address of the mobile node's secondary home agent.

Field type: Text. This field may be left as NULL.

CDMA_MIP_MN_AAA_SPI_INDICATOR

Security Parameter Index Indicator (MN-AAA)

Field type: TBool. This field may be left as NULL.

CDMA_MIP_MN_AAA_SPI

Security Parameter Index (MN-AAA).

Field type: TUint32. This field may be left as NULL.

CDMA_MIP_MN_AAA_SS_DATA

MobileIP MN-AAA shared secret data.

Field type: Text. This field may be left as NULL.

CDMA_MIP_MN_HA_SPI_INDICATOR

Security Parameter Index Indicator (MN-HA)

Field type: TBool. This field may be left as NULL.

CDMA_MIP_MN_HA_SPI

Security Parameter Index (MN-HA)

Field type: TUint32. This field may be left as NULL.

CDMA_MIP_MN_HA_SS_DATA

MobileIP MN-HA shared secret data.

Field type: Text. This field may be left as NULL.

CDMA_FCH_MUX

Fundamental channel multiplex option Field type: TUint32.

CDMA_SCH_MUX

Supplemental channel multiplex option Field type: TUint32.

DEFAULT_CDMA_IWF_NAME

IWF name.

Field type: Text. This field may not be left as NULL.

DEFAULT_CDMA_SERVICE_OPTION

Mask indicating valid service options.

Field type: TUint32 from RPacketContext::TServiceOption. This field may not be left as NULL.

DEFAULT_CDMA_PDP_TYPE

PDP type. (IPv4 or IPv6).

Field type: TUint32 from RPacketContext::TProtocolType. This field may not be left as NULL.

DEFAULT_CDMA_PDP_ADDRESS

PDP address of phone.

Field type: Text. This field may be left as NULL.

DEFAULT_CDMA_DATA_COMPRESSION

Data compression?

Field type: TBool. This field may be left as NULL.

DEFAULT_CDMA_ENABLE_IP_HEADER_COMP

Van Jacobson IP header compression on?

Field type: TBool. This field may be left as NULL.

DEFAULT_CDMA_ANONYMOUS_ACCESS

Use anonymous access?

Field type: TBool. This field may be left as NULL.

DEFAULT_CDMA_MIP

Default CDMA mobile IP?

Field type: TBool. This field may be left as NULL.

Deprecated

DEFAULT_CDMA_MIP_HA_ADDRESS

CDMA mobile IP home address.

Field type: Text. This field may be left as NULL.

Deprecated

DEFAULT_CDMA_MIP_TIMEOUT

CDMA Mobile IP timeout.

Field type: TUint32. This field may be left as NULL.

Deprecated

DEFAULT_CDMA_FCH_MUX

Default fundamental channel multiplex option Field type: TUint32.

DEFAULT_CDMA_SCH_MUX

Default supplemental channel multiplex option Field type: TUint32.

CDMA_OP_MODE

Defines the active operation mode in the mobile station. Possible values:

00 - SimpleIP only

01 - MobileIP with SimpleIP fallback

10 - MobileIP only

Field type: TUint32.

CDMA_MIP_MAX_NUM_RETRY

Maximum number of retries for MobileIP registration.

Field type: TUint32.

CDMA_MIP_FIRST_RETRY_TIMEOUT

Amount of time between the first and second MobileIP registration requests, while the Mobile Station did not receive a Registration Reply (units of 250ms).

Field type: TUint32.

CDMA_MIP_REREG_THRESHOLD

Re-registration threshold (time in minutes before the expiration of the registration lifetime).

Field type: TUint32.

VIRTUAL_BEARER_AGENT

Columns of the `VIRTUAL_BEARER table`

VIRTUAL_BEARER_NIF

VPN_SERVICE_POLICY

Columns of the `VIRTUAL_SERVICE table`

VPN_SERVICE_IAP

VPN_SERVICE_NETWORKID

WLAN_PROFILE

Columns of the `WLAN_SERVICE table`

WLAN_SSID

WLAN_ENCRYPTION_STATUS

WLAN_ENCRYPTION_TYPE

WLAN_DEFAULT_WEP_KEY

WLAN_ENCRYPT_KEY1_VALID

WLAN_WEP_Key1

WLAN_ENCRYPT_KEY2_VALID

WLAN_WEP_KEY2

WLAN_ENCRYPT_KEY3_VALID

WLAN_WEP_KEY3

WLAN_ENCRYPT_KEY4_VALID

WLAN_WEP_KEY4

WLANRANKING

WLAN_DIALOG_PREF

WLAN_NETWORK_TYPE

WLAN_FRAG_THRES

WLAN_RTS_THRES

WLAN_DES_TRANS_RATE

WLAN_BEACON_INT

WLAN_CHANNEL_ID

WLAN_AUTHENTICATION_MODE

WLAN_POWERSAVE_MODE

WLAN_ALLOW_UNENCRYPT_MODE

WLAN_ALLOW_SHORT_PRE

WLAN_PREAMBLE_TYPE

WLAN_TX_POWER_LEVEL

WLAN_EAP_PRESHARED_KEY

WLAN_REG_DOMAIN

WLAN_SEC_DATA

HOST_NAME

Columns of the `NETWORK table`

ACCESS_POINT_GID

Columns of the AccessPoint table

ACCESS_POINT_POLICY

ACCESS_POINT_TIER

ACCESS_POINT_MCPR

ACCESS_POINT_CPR

ACCESS_POINT_CPRCONFIGID

ACCESS_POINT_SCPR

ACCESS_POINT_PROTOCOL

ACCESS_POINT_APPSID

ACCESS_POINT_CONFIG_AP_ID_LIST

ACCESS_POINT_CUSTOM_SELECTION_POLICY

ACCESS_POINT_PRIORITY

TIER_IMPL_UID

TIER_THREAD_NAME

TIER_MANAGER_NAME

DEFAULT_ACCESS_POINT

MCPR_UID

CPR_UID

SCPR_UID

PROTOCOL_UID

PROTOCOL_CONFIG_LOADER_UID

PROTOCOL_CONFIG

LAYER_BELOW

EAPSIM_PROTOCOL_ID

EAPSIM_PROTOCOL_PSEUDONYM

EAPSIM_PROTOCOL_USE_NAI_REALM

EAPSIM_PROTOCOL_NAI_REALM

EAPSIM_PROTOCOL_MIN_RANDS

EAPAKA_PROTOCOL_ID

EAPAKA_PROTOCOL_PSEUDONYM

EAPAKA_PROTOCOL_USE_NAI_REALM

EAPAKA_PROTOCOL_NAI_REALM

SELECTION_POLICY_IAP1

SELECTION_POLICY_IAP2

SELECTION_POLICY_IAP3

SELECTION_POLICY_IAP4

SELECTION_POLICY_IAP5

SELECTION_POLICY_IAP6

SELECTION_POLICY_IAP7

SELECTION_POLICY_IAP8

SELECTION_POLICY_IAP9

SELECTION_POLICY_IAP10

SELECTION_POLICY_IAP11

SELECTION_POLICY_IAP12

SELECTION_POLICY_IAP13

SELECTION_POLICY_IAP14

SELECTION_POLICY_IAP15

SELECTION_POLICY_IAPCOUNT

SELECTION_POLICY_AP1

SELECTION_POLICY_AP2

SELECTION_POLICY_AP3

SELECTION_POLICY_AP4

SELECTION_POLICY_AP5

SELECTION_POLICY_AP6

SELECTION_POLICY_AP7

SELECTION_POLICY_AP8

SELECTION_POLICY_AP9

SELECTION_POLICY_AP10

SELECTION_POLICY_AP11

SELECTION_POLICY_AP12

SELECTION_POLICY_AP13

SELECTION_POLICY_AP14

SELECTION_POLICY_AP15

SELECTION_POLICY_APCOUNT

EAP_SEC_OUTER_EAP_TYPE

Columns of the `EAP Security Settings table`

EAP_SEC_ID

EAP_SEC_PASSWORD

EAP_SEC_CONFIGID

EAP_SEC_DATA

EAP_SEC_VENDORID

EAP_SEC_VENDORTYPE

TUN_EAP_INNERTYPE

Columns of the `Tunnelled EAP Settings Table`

TUN_EAP_DATA

EAP_TLS_CLIENT_CERT_NAME

Columns of the `EAP-TLS Settings Table`

EAP_LEAP_TIMEOUT

Columns of the `LEAP Settings Table`

STYPEID

Columns of the base `Params Table`

POLICYID

Columns of the `PolicySelector Table`

APPUID

SRCADDRESS

SRCMASK

DSTADDRESS

DSTMASK

SRCPORT

DSTPORT

SRCPORTMAX

DSTPORTMAX

PROTOCOLID

IAPID

PRIORITY

POLICYSELECTORID

Columns of the `PolicySelector2Params Table`

PARAMSID

DOWNLINKBANDWIDTH

Columns of the `GenericQos Table`

UPLINKBANDWIDTH

DOWNLINKMAXIMUMBURSTSIZE

UPLINKMAXIMUMBURSTSIZE

DOWNLINKAVERAGEPACKETSIZE

UPLINKAVERAGEPACKETSIZE

DOWNLINKMAXIMUMPACKETSIZE

UPLINKMAXIMUMPACKETSIZE

DOWNLINKDELAY

UPLINKDELAY

DOWNLINKDELAYVARIATION

UPLINKDELAYVARIATION

DOWNLINKPRIORITY

UPLINKPRIORITY

HEADERMODE

SCANPERIODMS

Columns of the `WifiScanEngine Table`

RSSIMIN

RSSIMAX

Enum TCommsDbModemSpeakerSetting

Enumerated sets and bitmasks for the modem speaker `MODEM_BEARER:MODEM_SPEAKER_PREF`.

EnumeratorValueDescription
EModemSpeakerSettingNever

Speaker always off.

EModemSpeakerSettingUntilCallAnswered

Speaker on until the call has been answered.

EModemSpeakerSettingAlways

Speaker always on.

EModemSpeakerSettingAfterDialUntilAnswer

Speaker on after dialing until answer.

Enum TCommsDbModemSpeakerVolume

Enumeration used by `MODEM_BEARER:MODEM_SPEAKER_VOL_PREF`

EnumeratorValueDescription
EModemSpeakerVolumeQuiet

Speaker off.

EModemSpeakerVolumeMedium

Speaker volume set to medium.

EModemSpeakerVolumeLoud

Speaker volume set to loud.

KModemCommRoleDCE

const TUintKModemCommRoleDCE

Bit mask used by `MODEM_BEARER:MODEM_COMM_ROLE`

KLinkableFlagTag

const TUint32KLinkableFlagTag

Enum TCommsDbIspType

Enumeration used by DIAL_*_ISP:ISP_TYPE, OUTGOING_WCDMA:GPRS_AP_TYPE.

EnumeratorValueDescription
EIspTypeInternetOnly

ISP internet only.

EIspTypeWAPOnly

ISP WAP only.

EIspTypeInternetAndWAP

ISP internet and WAP.

Enum TCommsDbBearerType

Enum used by DIAL_*_ISP:ISP_BEARER_TYPE.

EnumeratorValueDescription
EBearerTypeCSD

CSD bearer.

EBearerTypeHSCSD

HSCSD bearer.

Enum TCommsDbWapWspOption

Enum used by WAP_*_BEARER:WAP_WSP_OPTION.

EnumeratorValueDescription
EWapWspOptionConnectionless

WAP WSP option set to connectionless.

EWapWspOptionConnectionOriented

WAP WSP option set to connection oriented.

Enum TCommDbConnectionDirection

Enum for use in calls to `CCommsDatabase::OpenConnectionPrefTable*LC()`, CCommsDatabase::OpenIAPTableViewMatchingBearerSetLC() and CCommsDbConnectionPrefTableView::SwapConnectionPreferencesL()

EnumeratorValueDescription
ECommDbConnectionDirectionUnknown

Connection direction is unknown.

ECommDbConnectionDirectionOutgoing

Connection direction is outgoing.

ECommDbConnectionDirectionIncoming

Connection direction is incoming.

Enum TCommDbBearer

Bitmask for use in calls to: CCommsDatabase::OpenIAPTableViewMatchingBearerSetLC()

EnumeratorValueDescription
KCommDbBearerUnknown0x0

Bearer support unknown.

KCommDbBearerCSD0x1

CSD Bearer support.

KCommDbBearerWcdma0x2

WCDMA Bearer support.

KCommDbBearerLAN0x4

LAN Bearer support.

KCommDbBearerVirtual0x10
KCommDbBearerPAN0x20
KCommDbBearerWLAN0x40

DeprecatedCDMA2000

KCommDbBearerPSD

Enum TCommDbDialogPref

The dialog preference determines whether or not a user should be prompted with a dialog at connect time. Used in CCommsDbConnectionPrefTableView::UpdateDialogPrefL()

EnumeratorValueDescription
ECommDbDialogPrefUnknown

CommDB dialog preference is unknown.

ECommDbDialogPrefPrompt

Preference set to prompt user.

ECommDbDialogPrefWarn

Preference set to warn user.

ECommDbDialogPrefDoNotPrompt

Preference set not to prompt user.

ECommDbDialogPrefPromptIfWrongMode

Preference set to prompt user when in wrong mode.

Enum TCommDbGprsClassCBearer

Enum for the global setting: GPRS_CLASS_C_BEARER.

EnumeratorValueDescription
ECommDbGprsClassCBearerGprs

GPRS Class C bearer.

ECommDbGprsClassCBearerGsm

GSM Class C bearer.

Enum TCommDbOpeningMethod

Enum for use in calls to CCommsDatabase::NewL()

EnumeratorValueDescription
ECommDbCreated0

CommDB has been created.

ECommDbCopiedDefault

CommDB Copied default.

ECommDbOpened

CommDB has been opened.

KUidCommDbSMSBearerChange

const TUidKUidCommDbSMSBearerChange

UIDs for system agent event notification The global setting `SMS_BEARER` has changed

KUidCommDbSMSReceiveModeChange

const TUidKUidCommDbSMSReceiveModeChange

The global setting `SMS_RECEIVE_MODE' has changed

KUidCommDbGPRSAttachModeChange

const TUidKUidCommDbGPRSAttachModeChange

The global setting `GPRS_ATTACH_MODE' has changed

KUidCommDbModemTsyNameChange

const TUidKUidCommDbModemTsyNameChange

The `MODEM_BEARER:MODEM_TSY_NAME` field has been written or a `MODEM` record has been deleted

KUidCommDbModemDataAndFaxChange

const TUidKUidCommDbModemDataAndFaxChange

As `KUidCommDbModemTsyNameChange` above except only for a change in the record specified by the `MODEM_DATA_FAX` global setting

KUidCommDbModemPhoneServicesAndSMSChange

const TUidKUidCommDbModemPhoneServicesAndSMSChange

As `KUidCommDbModemTsyNameChange` above except only for a change in the record specified by the `MODEM_PHONE_SERVICES_SMS` global setting

KUidCommDbGPRSDefaultParamsChange

const TUidKUidCommDbGPRSDefaultParamsChange

A record in the `DEFAULT_GPRS` table has been modified or deleted.

KUidCommDbModemRecordChange

const TUidKUidCommDbModemRecordChange

A record in the `MODEM_BEARER` table has been modified or deleted.

KUidCommDbProxiesRecordChange

const TUidKUidCommDbProxiesRecordChange

A record in the `PROXIES` table has been modified or deleted

Enum TCommDbDatabaseType

Enum for DATABASE_TYPE field. Was deprecated in v7.0 but replaced for BC with v6.1 in v7.0s and v8.0.

EnumeratorValueDescription
EDatabaseTypeUnspecified0

Unspecified database type. Any type of database can be opened with this parameter.

EDatabaseTypeIAP

The database has an IAP table, which defines sets of ISPs and chargecards that may be used together.

EDatabaseTypeISP

The database is arranged using separate ISP, location, modem and chargecard tables whose records are not associated by using IAPs.

ISP type databases are deprecated from version 6.1.

Enum TCommDbCdmaOpCapability

Enum for the global setting `CDMA_OP_CAPABILITY`

EnumeratorValueDescription
ECommDbCdmaOpCapabilitySimpleIp0x1

Simple IP only supported.

ECommDbCdmaOpCapabilityMobileIp0x2

Mobile IP only supported.

ECommDbCdmaOpCapabilityFallback0x4

Mobile IP with Simple IP fallback supported.

Enum TCommDbCdmaSimpIpAuthCapability

Enum for the global setting `CDMA_SIMIP_AUTH_SUPPORTED`

EnumeratorValueDescription
ECommDbCdmaSimpIpCapabilityChap0x1

CHAP supported.

ECommDbCdmaSimpIpCapabilityPap0x2

PAP supported.

Enum TCommDbCdmaMIpAuthCapability

Enum for the global settings `CDMA_MIP_MN_AAA_AUTH_ALGORITHM` and 'CDMA_MIP_MN_HA_AUTH_ALGORITHM'

EnumeratorValueDescription
ECommDbCdmaMIpMd50x1

MD5 authentication is supported (RFC 3012).

Enum TCommDbBluetoothPanRole

Enum for the fields `PAN_SERVICE_EXTENSION:PAN_LOCAL_ROLE` and `PAN_SERVICE_EXTENSION:PAN_REMOTE_ROLE`

EnumeratorValueDescription
ECommDbPanRoleUnknown0x0000

Role not specified.

ECommDbPanRoleU0x1115

PAN-U Role.

ECommDbPanRoleNap0x1116

PAN-NAP Role.

ECommDbPanRoleGn0x1117

PAN-GN Role.

Enum TCommsDatEAPSECOuterEAPType

ENum for the fields `WLAN_SERVICE_EXTENSION:EAP_SEC_OUTER_EAP_TYPE`

EnumeratorValueDescription
ECommsDatEAPSecNone0x0

No Security

ECommsDatEAPSecEAPMD50x1

EAP-MD5

ECommsDatEAPSecEAPTLS0x2

EAP-TLS

ECommsDatEAPSecEAPTTLS0x3

EAP-TTLS

ECommsDatEAPSecPEAP0x4

PEAP

ECommsDatEAPSecLEAP0x5

LEAP

ECommsDatEAPSecEAPSIM0x6

EAP-SIM

ECommsDatEAPSecEAPAKA0x7

EAP-AKA

ECommsDatEAPSecEAPMSCHAPv20x8

EAP-MSCHAPv2

ECommsDatEAPSecEAPWPS0x9

EAP-WPS

Enum TCommsDatTunEapInnerType

ENum for the fields `WLAN_SERVICE_EXTENSION:TUN_EAP_INNERTYPE`

EnumeratorValueDescription
ECommsDatTunEapNone0x0

No Security

ECommsDatTunEapEAPMD50x1

EAP-MD5

ECommsDatTunEapMSCHAPv20x8

EAP-MSCHAPv2

Enum TCommsDatWlanEncrytionType

ENum for the fields `WLAN_SERVICE_EXTENSION:WLAN_ENCRYPTION_TYPE`

EnumeratorValueDescription
ECommsDatWlanEncryptionTypeNone0x0

None

ECommsDatWlanEncryptionTypeStaticWEP0x1

Static WEP

ECommsDatWlanEncryptionTypeTKIP0x2

TKIP

ECommsDatWlanEncryptionTypeAES0x3

AES

Enum TCommsDatWlanDialogPref

ENum for the fields `WLAN_SERVICE_EXTENSION:WLAN_DIALOG_PREF`

EnumeratorValueDescription
ECommsDatWlanDialogPrefUnknown0x0

Unknown

ECommsDatWlanDialogPrefPrompt0x1

Prompt

ECommsDatWlanDialogPrefNoPrompt0x2

Do Not Prompt

ECommsDatWlanDialogPrefWarn0x3

Warnings

Enum TCommsDatWlanNetworkType

ENum for the fields `WLAN_SERVICE_EXTENSION:WLAN_NETWORK_TYPE`

EnumeratorValueDescription
ECommsDatWlanNetworkTypeInfrastructure0x0

Infrastructure Network

ECommsDatWlanNetworkTypeAdHoc0x1

Ad-Hoc / Independent Network

Enum TCommsDatWlanDesTransRate

ENum for the fields `WLAN_SERVICE_EXTENSION:WLAN_DES_TRANS_RATE`

EnumeratorValueDescription
ECommsDatWlanDesTransRate1Mbps0x02

1 Mbps

ECommsDatWlanDesTransRate2Mbps0x04

2 Mbps

ECommsDatWlanDesTransRate5Mbps0x0b

5.5 Mbps

ECommsDatWlanDesTransRate6Mbps0x0c

6 Mbps

ECommsDatWlanDesTransRate9Mbps0x12

9 Mbps

ECommsDatWlanDesTransRate11Mbps0x16

11 Mbps

ECommsDatWlanDesTransRate12Mbps0x18

12 Mbps

ECommsDatWlanDesTransRate18Mbps0x24

18 Mbps

ECommsDatWlanDesTransRate22Mbps0x2c

22 Mbps

ECommsDatWlanDesTransRate24Mbps0x30

24 Mbps

ECommsDatWlanDesTransRate33Mbps0x42

33 Mbps

ECommsDatWlanDesTransRate36Mbps0x48

36 Mbps

ECommsDatWlanDesTransRate48Mbps0x60

48 Mbps

ECommsDatWlanDesTransRate54Mbps0x6c

54 Mbps

ECommsDatWlanDesTransRateAuto0xff

Automatic

Enum TCommsDatWlanPowerSaveMode

ENum for the fields `WLAN_SERVICE_EXTENSION:WLAN_POWERSAVE_MODE`

EnumeratorValueDescription
ECommsDatWlanPowerSaveModeDisabled0x0

Disabled

ECommsDatWlanPowerSaveModeFast0x1

Fast Powersave mode

ECommsDatWlanPowerSaveModeMax0x2

Max Powersave mode

Enum TCommsDatWlanPreambleType

ENum for the fields `WLAN_SERVICE_EXTENSION:WLAN_PREAMBLE_TYPE`

EnumeratorValueDescription
ECommsDatWlanPreambleTypeShort0x0

Short

ECommsDatWlanPreambleTypeLong0x1

Long

Enum TCommsDatWlanRegDomain

ENum for the fields `WLAN_SERVICE_EXTENSION:WLAN_REG_DOMAIN`

EnumeratorValueDescription
ECommsDatWlanRegDomainFCC0x10

FCC - United States

ECommsDatWlanRegDomainIC0x20

IC - Canada

ECommsDatWlanRegDomainETSI0x30

ETSI - Most of Europe

ECommsDatWlanRegDomainSpain0x31

Spain

ECommsDatWlanRegDomainFrance0x32

France

ECommsDatWlanRegDomainMKK0x40

MKK - Japan

ECommsDatWlanRegDomainAT0x4154

AT - Austria

ECommsDatWlanRegDomainAU0x4155

AU - Australia

ECommsDatWlanRegDomainBE0x4245

BE - Belgium

ECommsDatWlanRegDomainBR0x4252

BR - Brazil

ECommsDatWlanRegDomainCA0x4341

CA - Canada

ECommsDatWlanRegDomainCH0x4348

CH - Switzerland

ECommsDatWlanRegDomainCN0x434E

CN - China

ECommsDatWlanRegDomainCY0x4359

CY - Cyprus

ECommsDatWlanRegDomainCZ0x435A

CZ - Czech Republic

ECommsDatWlanRegDomainDE0x4445

DE - Germany

ECommsDatWlanRegDomainDK0x444B

DK - Denmark

ECommsDatWlanRegDomainEE0x4545

EE - Estonia

ECommsDatWlanRegDomainES0x4553

ES - Spain

ECommsDatWlanRegDomainFI0x4649

FI - Finland

ECommsDatWlanRegDomainFR0x4652

FR - France

ECommsDatWlanRegDomainGB0x4742

GB - United Kingdom

ECommsDatWlanRegDomainGR0x4752

GR - Greece

ECommsDatWlanRegDomainHK0x484B

HK - Hong Kong

ECommsDatWlanRegDomainHU0x4855

HU - Hungary

ECommsDatWlanRegDomainID0x4944

ID - Indonesia

ECommsDatWlanRegDomainIE0x4945

IE - Ireland

ECommsDatWlanRegDomainIL0x494C

IL - Israel

ECommsDatWlanRegDomainIS0x4953

IS - Iceland

ECommsDatWlanRegDomainIT0x4954

IT - Italy

ECommsDatWlanRegDomainJP0x4A50

JP - Japan

ECommsDatWlanRegDomainKR0x4B52

KR - Republic of Korea

ECommsDatWlanRegDomainLT0x4C54

LT - Lithuania

ECommsDatWlanRegDomainLU0x4C55

LU - Luxembourg

ECommsDatWlanRegDomainLV0x4C56

LV - Latvia

ECommsDatWlanRegDomainMY0x4D59

MY - Malaysia

ECommsDatWlanRegDomainNL0x4E4C

NL - Netherlands

ECommsDatWlanRegDomainNO0x4E4F

NO - Norway

ECommsDatWlanRegDomainNZ0x4E5A

NZ - New Zealand

ECommsDatWlanRegDomainPH0x5048

PH - Philippines

ECommsDatWlanRegDomainPL0x504C

PL - Poland

ECommsDatWlanRegDomainPT0x5054

PT - Portugal

ECommsDatWlanRegDomainSE0x5345

SE - Sweden

ECommsDatWlanRegDomainSG0x5347

SG - Singapore

ECommsDatWlanRegDomainSI0x5349

SI - Slovenia

ECommsDatWlanRegDomainSK0x534B

SK - Slovakia

ECommsDatWlanRegDomainTH0x5448

TH - Thailand

ECommsDatWlanRegDomainTW0x5457

TW - Taiwan

ECommsDatWlanRegDomainUS0x5553

US - United States

ECommsDatWlanRegDomainZA0x5A41

ZA - South Africa

ECommsDatWlanRegDomainWorld0xFF

World

KCountryChannels

struct TCountryInfoKCountryChannels

Enum TCommsDatWlanAuthenticationMode

ENum for the fields `WLAN_SERVICE_EXTENSION:WLAN_AUTHENTICATION_MODE`

EnumeratorValueDescription
ECommsDatWlanAuthenticationModeOpen

Open Authentication

ECommsDatWlanAuthenticationModeShared

Shared Key

ECommsDatWlanAuthenticationModeWPA

WPA

ECommsDatWlanAuthenticationModeWPAPSK

WPA-PSK

ECommsDatWlanAuthenticationModeOPENEAP

Open Authentication using EAP

ECommsDatWlanAuthenticationModeWPA2

WPA2

ECommsDatWlanAuthenticationModeWPA2PSK
ECommsDatWlanAuthenticationModeEapWps
© Nokia 2005.